Wearable Camera Recorder 10Hours Recording 256G Storage

1. Video recording: In the standby state, short press the "Power/Video recording button" to flash the blue light slowly 3 times and start recording once the blue light goes out.

The video is automatically saved in segments, 5 minutes as one segment in loop mode, and 8 minutes as one segment in non-loop mode.

2. Sound recording: Short press the "Sound recording button", and the green light slowly flashes 3 times and then goes out , and start recording; then short press the "Sound recording button" to stop recording and save, and the blue light is on.

The sound recording is automatically saved in segments, 60 minutes as one segment.

3. Camera: In the standby state, long press the "Camera button" for 2 seconds, the blue light is off and the green light is on to save, and then the green light is off and the blue light is on.

4. Motion detection: In the standby state, long press "Camera button" for 2 seconds to enter the motion detection mode for video recording. When the illumination change is detected, the machine enters the video recording state.